HOME
Home

MIGPRO COMMAND CENTER Z3

I. TALKING TALKING SHIT

MCC Z3 v3.01 is the 3rd generation and also the last version of migpro command center project. The adjustment in this version:

  1. Quick Load is removed
  2. Default spy ID is removed to avoid disconnecting if it is used by 10 people at once
  3. Delay is removed
  4. Entering the chatroom can be directly done after typing chatroom name without clicking on Save button first
  5. The use of ShellExecute function instead of Shell function to launch the migpro coretenz since Shell function is not compatible on some machines

II. USAGE

A. Migpro Command Center Z3

MCC Z3 uses tab control (SSTab), so the use of tab key on the keyboard to move around controls' focus is disabled regarding of 1 of SSTab behaviour

Tab Command

  1. Target ListBox
    After the target candidates appear on the list, simply click on each username to remove. Click on Save button afterthen, to save to targets into migpro coretenz configuration setting file (mccz3.ini). The targets will only be saved 10, so if you leave greater than 10, then the rest of top 10 won't be saved
  2. TextBox "Battlefield"
    Type the room name here. This room name will be used by spy and migpro coretenz as well
  3. Login
    Login Spy
  4. Get
    To get the list of targets
  5. Save
    To save the kick targets
  6. Launch
    Run migpro coretenz
  7. Exit
    Close migpro coretenz
  8. Enter
    Enter chatroom
  9. Leave
    Leave chatroom
  10. Start Countdown
    Activate the countdown, starting from 20 second, which at the end, starting to automatically kick or do nothing (depends on the setting on the Mission Brief tab > Combat tab)
  11. Blitzkrieg
    To kick manually without countdown timer (countdown is only for timing reference)

Tab Mission Brief (Settings)

Consists of 2 tabs: tab Annihilators and tab Combat

Tab Annihilators

First time MCC Z3 is run then it will load the last data on this tab: Username and Password

  1. Quick Save
    To save the ac    tive data into configuration setting file (mccz3.ini)
  2. Load Team 1, 2 ,3
    To load the previous saved data
  3. Save Team 1, 2 ,3
    To save the active data into separate Team 1, 2, 3

 

Tab Combat
First time MCC Z3 is run then it will load the last data on this tab: IP Address, Spy ID and Spy Password

IP Address
The only address can be used is the static one (xxx.xxx.xxx.xxx). gateway.mig33.com cannot be used since this dynamic address cannot be used by migpro coretenz

Intelligence Feature

  • Use Intelligence (Default enabled).
    Uncheck this option to use Manual List
  • Remove your team from the target (Default enabled).
    Uncheck this option if you want your team to be appeared in the list

Countdown
To show the countdown in seconds format, starting from 20 seconds. This countdown won't automatically run coz no text resources can be used to activate it. So you must activate it manually on tab Command (Start Countdown button)

  • Do nothing when countdown stops (Default)
    As the title says..
  • Start Blitzkrieg at 1 second left
    Start kicking when the countdown has reached 1 second. This option can be cancelled by choosing Do nothing when countdown stops before the countdown has reached 1 second, better at 5 second to avoid accidental kick. I suggest not to use this feature coz you cannot rely on it since it can mis-count when the system is busy (sometimes timer can be mis-count when lots of process in the system)
  • Start Blitzkrieg at 0 second
    Same as the above

 

B. Migpro Coretenz

The migpro applied to this MCC Z3 is called migpro coretenz. The features:

  1. 10 Sockets
    The use of 10 sockets for 10 IDs (core 10 > core ten > coretenz)
  2. Auto Relogin
  3. Direct access to procedure
    MCC Z3 only commands the first migpro coretenz by directly accessing its procedure, not through the buttons. So migpro coretenz no longer use buttons, just to make it more responsive
  4. Chain of Command
    MCC Z3 only commands the first migpro coretenz and the rest migpro coretenz are controlled by the first one. More well-organized in sending packets from migpro coretenz can be achieved by this method (theoritically)

These following items must be paid attention for a successful of a mission...

Migpro coretenz ready for combat
After migpro coretenz are launched by clicking on Launch button, you have to wait until migpro command center Z3 text appear on all migpro coretenz, like this following image:

that means migpro coretenz are ready to use to enter the chatroom. The time required between the first time migpro coretenz are launched until the ready-to-combat conditon is vary. In gprs connection, it needs approximately 2 minutes

Reconnecting
If 1 of migpro coretenz showing reconnecting text like this following image:

then it means some of your IDs encountered 1 of the following 3 errors:

  1. Login failed - Incorrect mig33 password
    This kind of error has been fixed in the source code, so it should never occur again
  2. Login failed - Invalid mig33 username blablabla
    You must make sure the correct usernames have been written
  3. Login failed - Ice.AlreadyRegisteredException when adding a new User object 'blablabla' to the object adapter
    This kind of error usually occured if 1 ID connects several time at once on slow connection

migpro coretenz will try to reconnect if error occured, but if those kind of text stil appear and not change to migpro command center Z3 text, then just close and relaunch the migpro coretenz

Failed to initialize winsock!
That happens because of failure of winsock library initialization. Close the migpro coretenz and relaunch

socket error
That happens because of failure in creating socket. If the text doesn't change to reconnecting then close the migpro coretenz and relaunch

no connection... and connection is lost...
Those errors have something to do with your connection. Before those text appear migpro coretenz will try to reconnect 3 times. If stil happens, then check your connection...

III. TROUBLESHOOTING

All this time i only tested MCC Z3 on Windows XP SP2. The following are known error:

Component 'MSWINSCK.ocx' or one of its dependencies not correctly registered: a file is missing or invalid

Component 'TabCtl32.Ocx' or one of its dependencies not correctly registered: a file is missing or invalid

That means 1 or all those files are not exist or not installed properly on your machine. To workaround it, the required files are available in mcc301\activex

ws2_32.dll

I forgot exactly, what this kind of error looks like. migpro coretenz uses Winsock v2 which requires ws2_32.dll file. But this kind of error almost never happened since that ws2_32.dll file is shipped with Windows 98 and later. To workaround it, the required files are available in mcc301\activex and copy it to \Windows\System32 folder

migpro comand center Z3 not exist!

migpro coretenz cannot be used directly by double-clicking on it

Put back what you have modified!

mcc_s.gif and or mcc_b.gif have been deleted or modified

Problem on 19 digits ID and 6 digits numered password

Someone reported that his 19 digits ID which has 6 digits numbered password (454545) cannot login succesfully using migpro coretenz. I don't know what caused the problem. To handle this just change your password..

IV. DOWNLOAD

migpro command center Z3
version 3.01
Released March 16th, 2009

http://www.4shared.com/file/111821708/8cf897a6/mcc301.html

(300 kB)

 

I declare the migpro command center project is now shutdwon.
Thx for using it and for all inputs. Goodbye MCC..

March 16th, 2009

V. VERSION HISTORY

migpro command center Z3
version 3.0
Released March 4th, 2009
http://www.4shared.com/file/111821707/1c478a37/mcc300.html

 

migpro command center merdeka!
version 2.1.3
Private Released August 18th, 2008
Public Released August 28th, 2008
http://www.evilshare.com/3bbd05e0-c652-102b-b7cf-000b6aa2a5f8

 

version 2.1.2
Released June 7th, 2008
http://www.evilshare.com/13b4d558-856d-102b-a14f-000b6aa2a5f8

 

version 2.1.1
Released May 31st, 2008
http://www.evilshare.com/9ab6bb26-8003-102b-a14f-000b6aa2a5f8

 

version 2.1.0
Released May 25th, 2008
http://www.evilshare.com/a389154e-7c4f-102b-a14f-000b6aa2a5f8

 

version 2.0.0
Private Released March 12th, 2008
Public Released March 21th, 2008
http://www.evilshare.com/d756d47c-48c1-102b-a5a4-000b6aa2a5f8

 

version 1.0.2 beta
March 8th, 2008
http://www.evilshare.com/aebd562e-3df6-102b-a5a4-000b6aa2a5f8

 

version 1.0.1
February 25th, 2008
http://www.evilshare.com/1cb11530-346a-102b-aa97-000b6aa2a5f8

 

version 1.0.0
February 19th, 2008
http://www.evilshare.com/e1988826-31ca-102b-aa97-000b6aa2a5f8
Create site!